Alloy Tool Steel Drill Rod
CR-V Alloy Silversteel |
115 Cr V3
Steel Nr. 1.2210 |
Cr-V-alloyed tool steel with high strength
Maintains blade sharpness
Good machinability when spheroidized-annealed
Small distortion on oil hardening (possible up to approx. 9mm) |
|
C |
1.15% |
Cr |
0.70% |
V |
0.10% |
Si |
0.25% |
Mn |
0.30% |
Twist drills and thread taps, reamers, piercing dies, ejectors, arbors, engraving tools, scrapers, files, etc.
Is preferably used with silver steel finish in smallest tolerances |
Spheroidized-annealed, drawn, ground and polished |
|
Max 750 N/mm2 (220HB) |
Hot Shaping -> |
1050-850 degrees C |
Soft Annealing Temperature -> |
710-750 degrees C |
Hardening Temperature -> |
810-840 degrees C in oil |
|
780-810 degrees C in water |
Hardness
in HRC |
|
|
Annealing Temperature in degrees Celsius |
|
Nomimal Dimension |
Tolerance Zone in mm (external measurements) |
Over |
To |
h8 (Steel) |
0 |
1 |
0 |
-0.014 |
1 |
3 |
0 |
-0.014 |
3 |
6 |
0 |
-0.018 |
6 |
10 |
0 |
-0.022 |
10 |
18 |
0 |
-0.027 |
18 |
30 |
0 |
-0.033 |
Nomimal Dimension |
Tolerance Zone in mm (external measurements) |
Over |
To |
h9 (Stainless Steel) |
1 |
3 |
0 |
-0.025 |
3 |
6 |
0 |
-0.030 |
6 |
10 |
0 |
-0.036 |
10 |
18 |
0 |
-0.043 |
18 |
30 |
0 |
-0.052 |
|